BOOKS AND MORE
BOOKS AND MORE

AD-P Special harrow-mounted seed drill

Accessories

Seed pipe monitoring

Saatleitungsüberwachung

Another useful system to assist the driver is the optionally available seed pipe monitoring which detects immediately any blockages down at the coulter and in the tube. Directly behind the distributor head, sensors monitor the seed flow in the seed pipes. Incorrect switch-over of the tramline rhythm is automatically detected by the system. Especially on long working days, the monitoring is an elegant solution to help keep an eye on the working performance.

HD tines for an even longer life span

HD_Zinken

With the HD tine, AMAZONE offers a tine which, due to its hard metal coating, features an up to three times longer service life.

By using HD tines, running costs are minimised and, at the same time, valuable operating time for readjustment and tine changing is saved.

Tractor wheel mark eradicators – KG rotary cultivator

Traktorspurlockerer

For operation on compaction-sensitive soils and at a reduced working depth, the optionally available tractor wheel mark eradicators make sense. They loosen the packed wheel tracks behind the tractor tyres. The position of the wheel mark eradicator can be adjusted horizontally and vertically. Depending on soil type and application of the machine, the wheel mark eradicator can be equipped with different loosening shares. The overload safety device provides a maintained release force in all positions.

KX/KG hydraulic depth adjustment

Hydraulische Tiefenverstellung KX KG

The optionally available hydraulic depth adjustment for the KX/KG rotary cultivator offers the driver even more comfort and operational possibilities than before, as now, the levelling board is guided in parallel via the roller and so does not require any readjustment when changing the working depth.

If required, for instance when working deeper on the headland, the rotary cultivator can be steplessly adjusted comfortably from the tractor cab. So any change in soil conditions can be directly responded to and the optimum quality of work maintained.

Universal setting tool – the tool for every need

Amazone, Mechanische Säkombination Cataya, Universelles Bedienwerkzeug

The universal setting tool is the ideal solution that avoids the transportation of and the troublesome searching for of more than one spanner.

Due to its ergonomic shape and the position of all the setting points, any adjustment can be changed instantly.

It is possible to set the following:
• Adjusting the track marker,
• Adjusting the coulter pressure,
• Adjusting the pre-emergence markers,
• Adjusting the Exact following harrow,
• Height adjustment of the levelling board,
• Adjusting the side plates,
• Opening the protection sieve

TL 3001 deep loosener

Tiefenlockerer_TL_3001

The compact TL deep loosener, with its 4 tines, makes it possible to loosen the soil down to a depth of 25 cm. With this system, AMAZONE offer the option of plough-less cultivation, even where a high level of straw prevails. Plough-less cultivation in one pass prevents soil compaction in the sowing horizon.

• As standard, 30 cm wing shares are used but, as an option, a wider loosening 60 cm wing share and a side plate extension are available.

Simple, simple, AmaDrill+

AmaDrill+

With the AmaDrill+ in-cab terminal, AMAZONE offers, in addition to the ISOBUS terminals, a machine specific terminal. AmaDrill+ offers operation of the drill without the need for any ISOBUS function on your tractor. This means that AmaDrill+ takes over control of all the important operational functions. This makes it easy to control and monitor the tramlining, electric metering drive plus also the seed rate from the tractor cab.

The display shows the operational positions of the bout markers and the tramline control. In addition, also indicated are the area sown and the fill level of the seed hopper.

Task Controller (job management)

Task Controller (TC) allows the data registration of the machine and the data exchange between machine and the farm management information system, using the standardised ISO-XML format. In this way, jobs can be comfortably imported into the terminal or the finished documentation can be exported after work. Both, the total values of the machine (TC.BAS) and also the location specific data (TC-GEO) can be saved. In addition to job management and to the documentation, Task-Controller can also be used to process application maps in an ISO-XML file format.

As standard, Task Controller is included in AmaTron 3 and in AmaPad. For AmaTron 4 it can be ordered via the “GPS-Maps&Doc” software pack.

• Creation or loading of jobs
• Processing jobs
• Documentation of the finished work
• Processing of application maps in an ISO-XML format

GPS-Maps – part-area, site specific application

GPS Maps

GPS-Maps enables uncomplicated part-area site specific management because this software module provides easy use of application maps in a shape file format. Here, either the required rate of the actual material to be spread or also the required active ingredient rate can be directly processed. This level of functionality is included with AmaPad as standard and can be added for AmaTron 3 and AmaTron 4 via the software packs “GPS-Maps” and “GPS-Maps&Doc”.

• GPS-Maps is an intuitive system to process application maps
• Automatic part-area site specific regulation of the application rate
• Optimum crop management via need-oriented application

GPS-Track – your parallel driving aid in the field

GPS Track

The GPS-Track parallel driving aid proves to be an enormous benefit when it comes to orientation in the field, especially also on grass or other areas without tramlines. It features several track modes, such as A-.B lines and Contour lines. The track lines are clearly numbered. Any deviation from the ideal line is plotted in the display by an integrated light bar. Thanks to the clear steering recommendations with exact tramline distances you always remain on track!

• With AmaPad, the GPS-Track function is already included as standard
• With AmaTron 4 and AmaPad, the light bar is, as standard, integrated already in the status bar

Everything from a single source!

Amazone Amapilot

Thanks to the AUX-N feature, you can operate multiple functions of the machine via AmaPilot+ or any other ISOBUS multi-function joystick.

The benefits of AmaPilot+:
• Perfect ergonomics
• Almost every function directly controlled via 3 levels
• Adjustable hand-rest
• Freely-programmable, individual key layout

Automatic GPS-Switch part-area shut-off with Section Control

Automatische Teilbreitenschaltung

Automatic part-width section control:
If the terminal to be operated features Section Control, such as, for example, GPS-Switch part-width section control from AMAZONE, the switching of the part-width sections can be carried out completely automatically and in relation to the GPS position. Once a field has been established by the driver, then, in the automatic mode, they can fully concentrate on handling the vehicle whilst the switching of the part-width sections in wedges and on the headland is carried out automatically.

Benefits of the automatic part-width section control:
• Stress relief on the driver
• Increase in precision especially at night or at higher speeds
• Less overlaps and gaps
• Saving of resources
• Less crop damage and environmental impact

Accurate placement of the seed

To avoid the over and under sowing at critical areas that often occurs in practice, precise sowing is very important. The remedy for the accurate placement is offered by the half-side control which reduces the relevant working width to half so that, especially in short-work and on the headland, a significant saving is achieved. The two halves of the drill each correspond to one controllable part-width section.

GPS-Switch

With GPS-Switch, AMAZONE offers a GPS-based, fully automatic, part-width section control for all AMAZONE operator terminals and ISOBUS compatible fertiliser spreaders, crop protection sprayers or seed drills.

GPS-Switch for AmaTron 3
• Automatic part-width section control of up to 80 part-width sections

GPS-Switch basic for AmaTron 4
• Automatic part-width section control of up to 16 part-width sections

GPS-Switch pro for AmaTron 4 and AmaPad
• Automatic part-width section control of up to 128 part-width sections
• Creation of a virtual headland
• Creation of Point of Interests (POI)
• Automatic boom lowering on an AMAZONE crop protection sprayer
• With AmaPad, the GPS-Switch pro licence is already integrated as standard

GPS-Switch with AutoPoint

GPS-Switch mit AutoPoint

The new AutoPoint system automatically determines the delay time, thus the time between the start and the end of the metering process and takes into account the conveying behaviour of the seed at the coulter. Via a sensor on the coulter, seed flow is constantly checked during every switch on and off. This allows an immediate response to any changes in the conveying behaviour of the seed or to changes in the driving behaviour. This automatic switching is rounded off by the driver assist system in the operator terminal which indicates to the operator the optimum forward speed when driving into and out of the headland.

From simple to high-tech – everything is possible

With the ISOBUS compatible AmaTron 3, AmaTron 4 and AmaPad, AMAZONE offers three particularly comfortable operator terminals for its ISOBUS equipment. In addition to the pure machine operation, even more application possibilities are available, such as, for example, the automatic GPSSwitch (Section Control) part-width section control. To meet those requirements, licences are needed for the additional applications so that every terminal can be equipped individually.

• All applications come pre-installed and can be initially tested free of charge
• Intuitive and clear actuation

Everything in view with the 2-terminal solution

In addition to the possibility of utilising an AMAZONE ISOBUS machine via the tractor terminal, the possibility is available to separate the functionalities of the tractor and the mounted implement and to operate them via two terminals. The tractor terminal can continue to control the tractor or also display the GPS applications whereas the additional operator terminal in its UT display mode is fully utilised to monitor and control the machine.

AmaTron 3: One knows what one has!

Amatron 3

AmaTron 3 features 8 backlit function keys and a high-contrast and low-reflection display. Depending on the driving situation and personal taste you can choose between the UT display (Universal Terminal) for machine operation or GPS displays. Here, the very good price-performance ratio is convincing! So AmaTron 3 is the ideal terminal for all who intend to supplement their existing AMAZONE machine park with a new ISOBUS machine.

Benefits of AmaTron 3:
• Compact design, requires little space
• Low-priced entry-level model for the ISOBUS world
• AmaTron 3 is a full ISOBUS terminal and allows, in addition, to operate all AMAZONE machines with AMABUS (AmaTron+ machines)
• Several applications can be actuated at the same time. Via the “Toggle-Button” the operator can toggle easily between the operational screens.

Terminal features:
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and other manufacturers
• AMABUS implement operation
• Tractor-ECU function to retrofit a non ISOBUS tractor (speed, PTO speed, ...)
• USB interface for data exchange
• ASD interface, e.g. for an N-sensor
• GPS interface

The following applications are possible:
• Task Controller – job management in ISO-XML format
• GPS-Maps (optional) – processing of application maps in shape file format
• GPS-Track (optional) – parallel steering aid with optional external light bar
• GPS-Switch (optional) – automatic part-width section control for up to 80 part width sections

External light bar

Amazone Externe Lightbar für Parallelfahrhilfe GPS-Track

As a possible extension for the GPS-Track parallel steering aid, an external light bar is available for AmaTron 3 which can be readily coupled with GPS-Track. The external light bar can be freely positioned in the tractor cab.

AmaTron 4 – Manager 4 all

AmaTron 4

AmaTron 4, with its 8" multi-touch colour display, fulfils the highest demands of any end user. No matter whether via the cleverly designed operator elements (touch / 12 backlit keys / 3 one-touch keys) or via the intuitive operation in day or night mode, AmaTron 4 offers maximum user friendliness. Via a finger swipe or via the App carousel, one quickly gets from application to application and to the clearly and simply structured operator terminal. The practical MiniView, a freely configurable status bar and also an integrated light bar make the use of AmaTron 4 especially clear and comfortable.

Benefits of AmaTron 4:
• Automatic full screen mode of the 8" multi-touch colour display when not being touched
• Practical MiniView concept
• Operation via the touch display or via soft keys
• Especially intuitive and user-friendly
• Field-related documentation
• Practice-oriented and intelligent menu guidance
• Day and night mode

Terminal features
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and from other manufacturers
• Tractor ECU function for retrofit to a non-ISOBUS tractor (power, speed, PTO speed, GPS geometry…)
• Two 2.0 USB interface ports for data exchange
• Interface for the connection of sensors via SCU-L adapter (e.g. for N-Sensors)
• GPS interface
• Analogue video input (camera connection)

The following applications are possible
• GPS-Maps&Doc (optional):
   - Task Controller – job management and application maps in ISO-XML file format
   - processing of application maps in shape file format
• GPS-Track (optional) – parallel steering aid
• GPS-Switch basic (optional) – automatic part-width section control of up to 16 part-width sections
• GPS-Switch pro (optional) – automatic part-width section control of up to 128 part-width sections
• AmaCam (optional) – Software licence for a camera of automatic reversing detection

AmaPad – The especially comfortable way to control agricultural machinery

Amapad

AmaPad features a high-resolution, high-contrast and low-reflection 12.1" multi-touch colour display. The operation of AmaPad is carried out solely via touch. With the practical “MiniView concept”, applications which aren’t being actively operated at that moment but need to be monitored are clearly displayed at the side. When needed these can be enlarged via “a finger swipe”. The possibility to individualise a “dashboard panel” with the displays of choice rounds up the user ergonomics. In addition to GPS-Switch part-width section control with GPS-Track pro also a professional parallel steering aid with integrated light bar is installed as standard.

Benefits of AmaPad:
• Particularly low-reflection, high contrast, large 12.1" multi-touch colour display
• Standard high-tech equipment level with GPS-Maps pro, GPS-Track pro and GPS-Switch pro
• Extended MiniView concept
• Upgrade to automatic steering is possible thanks to the automatic GPS-Track Auto track guidance
• Day and night mode

Terminal features
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and from other manufacturers
• Two 2.0 USB interface ports for data exchange
• WLAN module (via USB adapter)
• Remote servicing via the internet possible
• Interface for the connection of sensors via SCU-L adapter (e.g. for N-sensors)
• GPS-interface
• Light sensor for the optimum adjustment of the display

The following applications are possible:
• Task Controller – job management and application maps in ISO-XML file format
• GPS-Maps pro – processing of application maps in the shape file format
• GPS-Switch pro – automatic headland and part-width section control of up to 128 part-width sections
• GPS-Track pro – parallel steering aid with integrated light bar
• GPS-Track Auto – automatic track guidance (only on Pantera)