Automatic regulation via Flow-Controll – Operates just like using one large tank

Automatische Steuerung durch Flow-Control (1) FLOWCONTROL FÜR MARKETING_mit_Nummern_2

Electronic fill level management system

The specific feature of the FT 1001 is the 100 % integration of the front tank into the mounted sprayer via the Flow-Control electronic fill level management system in the ISOBUS terminal. The technological basis of Flow-Control is the two electronic fill level indicators in the tanks and the two high capacity injectors. The transfer rate in each direction is up to 200 l/min. The liquid in both spray tanks is always ideally homogenised.

The ISOBUS terminal automatically controls the liquid circuit, so that there is always an optimised weight distribution. Premature reduction of the load on the front axle is prevented. Depending on the fill level, new liquid is delivered from the front tank early enough so that the rear sprayer tank is never emptied before the front tank. The tank mix always remains homogeneous.

Manual control also allows the transport of just fresh water in the front tank.

Automated liquid flow via Flow-Control:

  1. AmaTron 4
  2. High capacity injectors 
  3. Switch valves for injectors
  4. Electronic fill level indicators
  5. Flow-Control pump 115 l/min
  6. Internal cleaning
  7. UF spray pump
  8. Spray line

Related links

Here you will find further information on crop protection

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.