Tines | Tine carriers | Levelling board

KG_KX_KE_2014_04.jpg

Safe-System: Integrated stone release

The sprung tine fixing system allows the tines to yield when stones are encountered. The tines are firmly clamped in the socket in the centre of the tine carrier. The socket becomes wider towards the outside so that the horizontal part of the tine can twist out of position while remaining sprung. Much of the shock is absorbed when the tip of the tine hits a stone. This tine fixing system ensures the safe operation in stony soils and allows the tines on both the KX and KG to be used in the “on-grip” mode.

More informations + Less informations -
KG_KX_KE_2014_02_rdax_119x300.jpg

e-box – the innovative gearbox for your rotary harrow!

The direct drive! A simple angle drive redirects the power only once and connects directly with the tine carriers. That saves fuel as fewer gear wheels mean less internal friction, less heat generation and less wear. The highest torques only appear directly at the rotor shaft. That provides a high level of durability and reliability, and puts less stress on the tractor.  Rotor Speed Change: simple and quick The rotational speed of the tines can be changed by interchanging the two bevel gears. This system allows optimum adaptation to any soil conditions, can be easily managed and is cost-effective because no additional replacement gears are required.  KE Special: Only 850 kg over 3 m e-box is lighter than other gearboxes. That saves weight and requires less lifting power. Even smaller tractors can lift this rotary harrow.

More informations + Less informations -
KG_KX_KE_2014_01_rdax_145x300.jpg

Long-Life-Drive – for all rotary harrows and rotary cultivators

Quality within the system: Long-Life-Drive is the optimised drive system for all AMAZONE rotary harrows and rotary cultivators that ensures an extended operating life, maximum smooth running and a high resale value. Gear wheels and bearings run in a single oil bath and so are maintenance-free – there are no grease nipples. (1) Robust gearbox (2) Highly-hardened spur gears with large teeth contact area (3) Exact spacing of all bearing seats for a maximum smooth running (4) Heavy-duty taper roller bearings with wide spacing between mounting points (5) Large clearance between tool carrier and smooth trough base for blockage-free mulch sowing and optimum though passage (6) Double sealing system with cassette sealing ring against oil loss and labyrinth seal against ingress of plant fibres and dirt (7) Tine carriers and shaft forged forged from one piece and with a large shaft diameter, KE rotary harrow ∅ = 45 mm/KG and KX rotary cultivator ∅ = 60 mm (8) Quick + Safe System with proven, tool-less tine change solution and integrated stone safety protection

More informations + Less informations -
Zinkenwechsel_Arm_lang_orange_110926_111proz_kl_rdax_170x186.jpg

Quick-System – Quick tine change system

The tines are simply pushed into the sockets of the tine carrier and secured with a lynch pin. It couldn't be easier or quicker as there are no tine fixing bolts that require retightening. Even converting tine operation from “on-grip” to trailing mode is quick and simple. The tines, which are forged from special hardened steel, are elastic and wear-resistant.

More informations + Less informations -
KG_KX_KE_2014_22.jpg

Levelling board

The levelling bar levels the flow of soil between rotary harrow and roller, and presses down stones. The levelling bar is set in height comfortably and quickly via a crank handle thereby easily establishing the pre-conditions for an even reconsolidation via the following roller. ''With the large diameter wedge ring roller we achieved a very good performance on medium to heavy soils under a variety of conditions and, last but not least, due also to the (rubber dampened) levelling board. Its height adjustment is carried out via a good ratchet mechanism.'' (profi 8-2013 - Test AMAZONE KG 6001-2 rotary cultivator)

More informations + Less informations -
Tiefeneinstellung.jpg

Eccentric pins – exact setting of the working depth

The working depth of AMAZONE rotary harrows and cultivators can be easily adjusted by repositioning and turning an eccentric pin in 16 different settings. During operation the carrying arm rests underneath the eccentric pin and when lifted it drops onto the gear case trough. In this way, the rotary harrow or rotary cultivator can jump over stones without having to raise the roller and the seed drill at the same time. This saves tines and rotor damage.

More informations + Less informations -
KG_KX_KE_2014_07.jpg

Wheel mark eradicator

Optionally, for both rotary harrows and rotary cultivators the soil can be loosened in the tractor wheel marks with the height and side adjustable eradicator tines. The wheel mark eradicators are equipped with a sprung overload safety device to protect against damage.

More informations + Less informations -
seitenschilder.jpg

Side plates

The side plates are mounted on sprung suspension which allows them to yield upwards when stones are encountered. A long carrying arm and sturdy springs also make the KE Super reliable to use on stony, heavy soils. This also applies for all rotary cultivators.

More informations + Less informations -

Related links

Here you will find further information on cultivation

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.