No matter whether shallow or deep

Egal ob flach oder tief (1) Ceus_Arbeiten_Standart_d1_170622

With the Ceus 4000-2TX, 5000-2TX, 6000-2TX and 7000-2TX, AMAZONE introduces a new and flexible operating concept. Ceus combines the operational action of a compact disc harrow for shallow soil tillage with a tine section for deep loosening. This combination makes Ceus-2TX the perfect implement for farms that have to incorporate copious amounts of organic matter, such as grain maize and catch crops or wish to operate very flexibly – both shallow and deep – with just one implement. Operational speeds of 8 to 15 km/h enable large acreage outputs.


Several operational processes in one pass
With the new trailed disc harrow cultivator combination, several operational processes can be combined into one pass. So, the front disc segment with serrated 510 mm discs enables shallow cultivation at working depths of 5 to 14 cm. This is then followed by the tine section, with its C-Mix Super tines, which can loosen down to a maximum depth of 30 cm. At the same time, during operation, the penetration force of the tine section increases the cutting effect of the front discs.


The front disc element
The front disc element distributes the organic matter by intensively cutting and mixing the crop residues on the soil surface. At the same time, a finely crumbled structure occurs within that top soil layer. This results in both optimum preconditions for straw decomposition as well as producing very good germination and growing conditions. The discs are individually suspended and protected from damage via sprung rubber mountings that also ensure good ground contour adaptation. The maintenance-free, oil-immersed bearings on the discs are identical with those found on the Catros compact disc harrows and have been proven many tens of thousand times over. The disc stagger of 12.5 cm and the steep 17° angle of attack on the front row of discs and 14° at the rear row ensure an overall tilling effect and a perfect mixing-in of organic matter.

Adjustment of the depth of the disc section is carried out via a parallelogram linkage, whereby the penetration intensity can be changed by twisting the disc section. Also, even at the maximum working depth of the tine section, by setting the disc section in the upper most position they can be raised out of work completely. As a result, deep loosening is possible without utilising the disc section. This reduces the pulling power and saves fuel.


  1. Ceus with all soil-engaging elements in the work position
  2. Working without the disc segment
  3. Working without the tine segment

Related links

Here you will find further information on cultivation

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.