AutoTS border spreading system – Full control. At all times!

Grenzstreusystem AutoTS (1) ZG-TX11200_Claas_d0_kw_DJI_0432_d2_230913_CMS

Effective and precise – spread only where the fertiliser will benefit plant development





Grenzstreusystem AutoTS (2) ZA_M_Randstreuen
  1. Working width 2) Half working width

Side spreading (yield-oriented setting)
The adjacent field is an area which is used agriculturally. In this case it is tolerable for a small quantity of fertiliser to be thrown over the field border. The full target rate is applied right up to the field boundary.


Grenzstreusystem AutoTS (2) ZA_M_Grenzstreuen
  1. Working width 2) Half working width
Border spreading (environmentally oriented setting)
If the field is next to a road or a cycle path, no fertiliser may be thrown beyond the field boundary. In this case, the throwing distance is adjusted in combination with the shutter slide.


Grenzstreusystem AutoTS (3) ZA_M_Grabenstreuen
  1. Working width 2) Half working width

Water course spreading (environmentally oriented setting)
If there is a body of water directly at the edge of the field, a defined distance to the water must be maintained when fertilising according to the fertiliser regulations. For this purpose, the throwing distance is further reduced in combination with the shutter slide.


  • The ZG-TX sets new standards for border spreading in the combi spreader sector. The AutoTS disc-integrated border spreading system is mounted on the right-hand side of the machines as part of the TS spreading system. This guarantees an optimum border spreading result right up to the edge of the field, even at large working widths.

Spread pattern simulator

The spread pattern simulator gives an intuitive introduction to how a fertiliser spreader works. Optimal settings for a variety of combinations of fertilisers and working widths can be clearly displayed and the influence that wind and fertiliser quality have also shown. Try it for yourself…