Border spreading systems from AMAZONE – Full control. At all times!

Grenzstreusysteme von AMAZONE (1)

Effective and precise – spread only where the fertiliser will benefit plants

  1. Working width 2) Half working width
Side spreading (yield-oriented setting)
The adjacent field is an area which is used agriculturally. In this case it is tolerable for a small quantity of fertiliser to be thrown over the field border. The full target rate is applied right up to the field boundary.

  1. Working width 2) Half working width

Border spreading (environmentally oriented) with Limiter V or V+
If the field is next to a road or a cycle path, no fertiliser may be thrown beyond the field boundary. In this case, the throwing distance is adjusted in combination with the shutter slide.

  1. Working width 2) Half working width

Water course spreading (environmentally oriented setting)
If there is a body of water directly at the edge of the field, a defined distance to the water must be maintained when fertilising according to the fertiliser regulations. For this purpose, the throwing distance is further reduced in combination with the shutter slide.

Grenzstreuen mit Grenzstreuschirm (1) Illu_Grenz-_Graben-_Rand-_Beetstreuen_001_d0_20150831
  1. Working width 2) Working width

BorderTS in combination with AutoTS 
Using the BorderTS deflector means that the full target amount is applied at the field boundary, without spreading beyond it. In combination with AutoTS, the area between the first tramline and the field boundary is fertilised with the desired application rate. A sharp-edged cut-off right up to the field boundary is achieved.

Bed spreading via bed spreading deflector on both sides
AMAZONE offers the bed spreading deflector for spreading special crops in beds on the left and right of the tramline. It keeps the track virtually free from fertiliser. The bed spreading deflector is actuated manually or, as an option, hydraulically from the tractor cab.

Beetstreuen mit beidseitigem Beetstreuschirm (1) Beetstreuschirm_d0_cw_4876_d1_160512_CMS

  1. Working width 2) Working width

Spread pattern simulator

The spread pattern simulator gives an intuitive introduction to how a fertiliser spreader works. Optimal settings for a variety of combinations of fertilisers and working widths can be clearly displayed and the influence that wind and fertiliser quality have also shown. Try it for yourself…