System and operational conditions

System und Einsatzbedingungen (1) Condor_15001_001_d1_170116

When using reduced mulch sowing or direct sowing methods, it is important in both cases that the fertiliser is placed in the ground below the crop residues in order to prevent losses due to gas emission, especially in times when fertiliser costs are rising. Scientific trials in Regina, Canada and Samara, Russia show that with this method it is possible to apply 30 kg/ha of pure N when sowing wheat and approximately 25 kg/ha when sowing rape. In the very dry and continental conditions in Canada and the Eurasian Steppe, where the potential yield is relatively low, this quantity is often completely sufficient for the usual spring cropping.

Thanks to the technical features of the Condor as described, it is ideal when used for direct sowing on large-sized farms. The coulter is only 12 mm wide and thus only moves as much soil as is absolutely necessary for optimum seed placement under the straw. This not only prevents ground water loss but also lowers the tractive power requirement and fuel consumption. 220 HP was sufficient tractor output for the Condor 12001 in extensive tests under true working conditions. On average, the spectacular figure of only 2.7 litres of diesel per hectare was required with the Condor 15001. Also under working conditions, the Condor 15001 was able to achieve a daily work rate in 13 hours of 150 hectares at a working speed of 8 to 10 km/h.