The new generation of heavy compact disc harrows from 4 m to 7 m

Perfectly level edge to edge with the new large side discs
With the launch of the Certos 4002-2TX, 5002-2TX, 6002-2TX and 7002-2TX, AMAZONE presents the second generation of the Certos heavy compact disc harrow in working widths 4 to 7 m. The new Certos has a completely new chassis concept that is optimised for the harsh operating conditions of this machine. It now provides the discs with an even greater clearance for evading obstacles when overloaded. Added to this are optimised side plates, which means that the loosened soil is held perfectly inside the machine’s width even at deeper working depths, leaving an absolutely even quality of work when matching bout to bout.

Large discs with a large clearance for handling a lot of organic matterThe Certos is ideal for use in intensively mixing soil tillage down to medium-deep soil cultivation. The 660 mm discs allow a range of working depths from 7 cm down to a maximum of 20 cm. It is not only the extremely large diameter discs that make the machine a specialist when it comes to incorporating high quantities of organic material – but it is also the large distance between the two rows of discs, the wider disc spacing of 17.5 cm and the suspension of each disc individually that also ensures maximum passage. As a result, Certos is in its element when a lot of organic matter has to be shredded and evenly mixed into the soil. In addition to stubble cultivation, the Certos is therefore also the ideal machine for grassland renovation, re-cultivation of fallow land or the handling of maize stubble. In addition, the machine can be used an alternative to a tined cultivator for a secondary medium-deep working pass down to 20 cm.

The large discs of the Certos, just like those of the Catros, are deliberately not arranged in an X shape on the disc carrier. For the front row of discs, the discs are aligned to the left, and to the right on the rear. This ensures the optimal passage of large amounts of organic matter and a uniform working profile across the entire working width. If the machine is inclined to pull sideways under certain conditions, e.g., due to this disc arrangement or in hilly terrain, this row of discs may be controlled from the tractor cab by use of a hydraulic upper tie bar on the machine that can be used easily to adjust the angle of the Certos from the driver’s seat in the tractor cab.

Working depth adjustment
The working depth can be set mechanically using spacers, which are positioned in between the roller and the main frame at the back of the machine. At the front, the machine is optimised for depth via the guide wheels. The position of these wheels can be changed by turnbuckles. The adjustment points can be reached quickly and without climbing on to the machine. In addition, the turnbuckles are provided with a scale for orientation, which makes the adjustment procedure much easier. To adjust the working depth during operation, the machine can be optionally equipped with a hydraulic depth adjustment via a tractor spool valve. The adjustment is then connected to a scale that can be read from the cab.

Maximum area output and minimal maintenance effort
To reduce maintenance to a minimum, the Certos also has maintenance free, oil-immersed bearings with face seal. The type of bearing matches to those used in the Catros, which have been proven millions of times over. The Certos bearings, however, are dimensioned more robustly with a larger diameter to meet the needs. In addition, the bearing sits protected in the shadow of the disc.

The bearings of the following roller are also completely maintenance-free.

Large roller range available for CertosFor reconsolidation, customers can choose the ideal solution individually for their own operation from the complete AMAZONE range with 11 different roller types available. The rollers are connected to the Certos by means of clamps with the proven quick-change system, which means that the roller can be replaced quickly for matching to various soil types.

Optional equipment as required
As an option, the Crushboard is available in front of the roller. It can be mechanically adjusted using spindles or using the optional hydraulic system, including easy-to-read scales. Various harrow systems are available for behind the roller. Other optional extras include the new universally-mounted AMAZONE GreenDrill 501 catch crop seeder box and the choice of LED road traffic lighting.

Certos 6002-2TX

We need your consent

This content is provided by an external server. By activating the content, personal data may be accessed and Cookies may be utilised.

Press review 2019

250 000 Sämaschine
19 Nov 2019

The 250,000th Amazone drill sold

The origin of the seed drill’s history stretches back to 1947, when Dipl. Eng. Heinrich Dreyer worked together with Mr Kademann to develop the first D1 seed drill that had a working width of 2 m and which was equipped with the innovative Elite seed wheel for and easy switch between fine and normal seeds. This seed drill revolutionised the drilling of catch crops because, unlike other seed drills of that time, the D1 didn’t need the seed wheels to be constantly changed.

AmaSelect Row
24 Oct 2019

Three Agritechnica silver medals for Amazone

The first successes for Amazone on the run-up to Agritechnica 2019. The neutral panels of experts appointed by the DLG (German Agricultural Association) has awarded silver medals to three of Amazone’s innovations.

5 Oct 2019

Amazone RoTeC coulters – in use more than 1.5 million over

An Amazone innovation enjoys a very special anniversary with 1.5 million RoTeC single disc coulters now in use. And, at the standard row spacings of between 12.5 cm and 16.6 cm, this would correspond to a total working width of over 200 kilometres! The RoTeC coulter shows its strengths particularly under difficult mulch sowing conditions – when, for example, dealing with large quantities of crop residues and on damp, heavy and sticky soils.
Further notable advantages:...

Amazone_Cirrus mit Minimum TillDisc (1)
28 Aug 2019

Cirrus with Minimum TillDisc

Tillage-Live 2019 at Deenethorpe, Corby next week will see the public unveiling of the 6 metre Cirrus 6003-2C Minimum TillDisc with its new wavy disc element in front of the Matrix tyre roller. This unit takes the place of the normal twin-row of cultivation discs and, with a row spacing of 16.6 cm, the straight running 460 mm boron steel corrugated discs are designed to cut through any crop residues, cover crops or soil surface and run directly in front of the sowing...

GHD 1800
16 Jul 2019

Scoop purchase of Groundkeeper GHD 1800

The Groundkeeper GHD offers all the convenience of a trailed mower / collector – so less horsepower required, increased manoeuvrability and yet with a larger size hopper capacity; around 300 litres more in relation to a linkage-mounted machine and so less emptying time.

Cayros 2016
17 Jun 2019

Save £250/furrow on Cayros ploughs - an opportunity not to be missed

Cayros ploughs – Buy Now and Save!
The Cayros is the perfect match for any farm
Cayros mounted reversible ploughs come in a comprehensive range from 2 to 6 furrows and with a choice of 8 different plough bodies to suit individual soil conditions.

CombiDisc 3000
30 May 2019

The new CombiDisc 3000 lines up at the Cereals Event

For use in combination with either the gravity Cataya or the pneumatic Centaya harrow-mounted seed drills, Amazone now offers the new CombiDisc mounted compact disc harrow in a 3 m working width.

Equipped with 24 serrated discs, each featuring a diameter of 410 mm, the CombiDisc is ideally suited for seedbed preparation at depths from 3 to 8 cm.

29 May 2019

Cirrus 03-2CC Double-Shoot seeding combination to make its debut at Cereals

Cereals 2019 sees further expansion of the Cirrus trailed seeder range. Designated the Cirrus 03-2CC Double-Shoot, these hydraulic folding 4 & 6 metre trailed drills now feature a second distribution head and coulter system that can be used for either sowing a second seed type or applying fertiliser directly into the seedbed without coming into direct seed contact.

23 Apr 2019

Pantera cleans up its act

The new Pantera 4503 self-propelled brings together Comfort-Pack 1 and an innovative new boom guidance system.
At the heart of the Pantera 4503 is the proven 6-cylinder Deutz engine which offer a maximum engine power of 218 HP. The in-line, turbo-charged and charge-air cooled engine ensures, thanks to its intelligent ECO mode engine management, the minimum amount of fuel used yet maintains that overall optimum performance.

15 Mar 2019


This Spring sees the opening of AMAZONE’s new training, education and research centre here at Orchard Farm, Auckley, Doncaster, DN9 3NW. Orchard Farm represents a multi-million £ investment in British farming by the Dreyer family, who own the AMAZONE Group, with the new Centre being set in 12 ha of arable cropping that includes demonstration areas and trial plots. And for the launch of this brand new facility, you are cordially invited to attend our AMATECHNICA 2019...

Neuer Inhalt (3)
5 Mar 2019

AMAZONE Group turnover climbs to record level

Amazone turnover increases in 2018 to record level
Amazone turnover increases significantly despite the drought
For the 2018 financial year, the turnover of the Amazone Group of Companies further increased despite the drought that affected some countries in the second half of the year. The turnover increased to a record level of 481 Million Euros.

Catros Special mit Crushboard
14 Feb 2019

Crushboard or eradicators, the choice is yours

Front mounted frame with Crushboard or tractor wheel mark eradicators for Catros Special or CatrosXL

For the Catros Special and CatrosXL compact disc harrows in working widths of 3 m, 3.50 m and 4.00 m, AMAZONE now optionally offers a front mounted frame with Crushboard. This option makes these compact disc harrows ideally suited to seedbed preparation as the Crushboard achieves a strong crumbling and levelling effect.

1 Jan 2019

Get a ZA-M ecoSPECIAL for just £4,950

Irrespective of the amount of fertiliser being spread on a farm, it is an expensive commodity that needs to be accurately applied. The ZA-M range of spreaders has been at the forefront of fertiliser spreading on British farms for decades and the simple mix of gentle fertiliser handling with the SBS – Soft ballistic System – and the high quality components made from stainless steel and plastic make it both easy on the fertiliser and easy on the pocket.