Plough bodies | Soil-engaging parts

SpeedBlade plough bodies – Plough bodies from a new perspective

Maximum speed – Minimum wear

SpeedBlade – The new innovative plough bodies
The new SpeedBlade plough bodies with their patented extra-large front shin on the mouldboard and the ©plus hardening process ensure significantly less wear at high forward speeds. As ploughing speeds increase, the wear point shifts further to the rear. Wear on conventional plough bodies begins directly on the mouldboard at higher speeds as a result of a smaller front shin. Only the front shin of the mouldboard has to be replaced thanks to this patented enlarged front shin. This avoids the troublesome and expensive replacement of the entire mouldboard. 

More information + Less information -
Überdeckende Scharspitze (1) Standartspitze_SpeedBlade_d1_210819_2

Covered point – Maximum ease of pull of the plough body

Since the point covers the wing, the joint is protected by the point. This clever join up means that no plant residues, baler twine or root remnants get caught in the share.

More information + Less information -
Das ©plus-Härteverfahren (1) S-Blade S 35_d1_170620_p50

The ©plus tempering process – the know-how of heat treatment

As a manufacturer of wearing parts for the soil tillage industry, we can look back on a history spanning decades. Continual advances in materials and production technology as well as our expertise in heat treatment are the basis for achieving the highest possible quality in our wearing parts for ploughs.

Carbon in its purest form, diamond, is the hardest naturally occurring substance. A hardening process which involves introducing carbon into the steel is used to increase the hardness and durability of ©plus wearing parts. AMAZONE uses a unique hardening process to achieve a very high level of hardness on the front of components, such as the shin, to produce the optimum resistance to wear. The back remains relatively soft but at the same time extremely tough and impact resistant.

Benefits of the ©plus hardening process: 

  • Longer service life 
  • High impact resistance 
  • Less pulling power requirement 
  • Reduced fuel consumption 
  • Less sticking to the smoother outer surface

  1. Hardened front of mouldboard
  2. Relatively soft rear of mouldboard
More information + Less information -
Rahmenrohre aus hochfestem Stahl für höchste Lebensdauer (1) Mollbleche_c-plus_frei_d1_190321

Box section beam made of high-grade steel for a long service life

All the beams on AMAZONE ploughs are produced from a special high-tensile steel. The over-sized wall thickness means that, not only is the whole beam robust, but also all the bolt fixings are extremely strong with this heavy wall thickness also preventing any hole elongation or deformation of the box section around the bolt fixings. A further feature of the ploughs is the design of the plough beam without any weld seams.

More information + Less information -
Scharspitzen – Für jeden Einsatz die richtige Scharspitze (1) Pflug_Verschleissteile_d0_kw_P3020353_d1_210819

Points – The right point for every application

The advantages of the different points:

1. Integrated point: 

  • Angled forwards for good soil penetration 
  • The point covers the wing
  • Reduced drag thanks to the smooth transition between the point and the front shin of the mouldboard

2. Integrated HD point: 

  • Angled forwards for good soil penetration
  • Armoured at the rear
  • For an exceptionally long service life
  • Reduced drag thanks to the smooth transition between the point and the front shin of the mouldboard

3. Integrated S HD point: 

  • Narrower and angled even more forwards for excellent soil penetration
  • Armoured at the rear
  • For particularly tough conditions and a long service life
  • Reduced drag thanks to the smooth transition between the point and the front shin of the mouldboard

More information + Less information -
Offener Körperrumpf – Für noch mehr Leichtigkeit (1) Streifenkoerper_d1_210819

Open frog – To make things easier

The shape of the open frog prevents soil from getting caught underneath. This means that the plough is even easier to pull. At the same time, the solid adjustable support of the slatted mouldboards provides more stability.

More information + Less information -

Trash boards | Sword landsides | Landside protection

Trash boards:
a cost-effective alternative to skimmers when incorporating surface crop residues. With additional support on the leg as standard.

Sword landsides: 
The sword landside is an alternative to the disc coulter, which, especially on heavy, stony ground ensures a clean furrow wall and also reduces the wear and tear on the plough body.

Landside protection: 
The landside protection increases the area for support of the plough on the furrow wall. This improves plough guidance significantly, especially on slopes. In order to enable the use of wider tyres in the furrow, a furrow-widening plate can be installed as an option on the last plough body.

More information + Less information -
Scheibenseche – Eine saubere Sache (5) Teres300VS_Deutz_d0_kw_P8177298_d1_220127

Disc coulters – A clean solution

The disc coulter is important for a clean ploughing finish. Disc coulters also make a considerable contribution to efficient ploughing. The disc coulters’ precise cutting action helps achieve full inversion and complete incorporation of any crop residues as well as leaving an effective furrow clearance. 

The disc coulter is available in a smooth or serrated profile with a diameter of 500 mm and in a serrated profile of 600 mm.

Scheibenseche – Eine saubere Sache (1) Tyrok_langer_Halter_500gezackt_442_d1_210819
Serrated disc coulter, Ø 500 mm, with a long holder
Scheibenseche – Eine saubere Sache (2) Tyrok_kurzer_Halter_500gezackt_441_d1_210819
Serrated disc coulter, Ø 500 mm, with a short holder

Scheibenseche – Eine saubere Sache (3) Tyrok_langer_Halter_600gezackt_443_d1_210819
Serrated disc coulter, Ø 600 mm, with a long holder
Scheibenseche – Eine saubere Sache (4) Tyrok_HoeLS_gefederter_Halter_500gezackt_449_d1_210819
Spring-loaded, serrated disc coulter, Ø 500 mm

More information + Less information -
Vorschäler – Für alle Fälle (1) Tyrok_Vorschaeler_G1-428_d1_210819

Skimmers – For any situation

M2 skimmer
The M2 skimmer is universally suited for use in grassland ploughing as well as where there are large amounts of crop residues, especially maize straw.

L2 Skimmer
The L2 Skimmer has an even stronger turned shape than that of the M2 Skimmer. It is therefore suitable for incorporating extreme volumes of organic matter.

G2 skimmer
The use of the G2 skimmer ensures blockage-free ploughing, especially on heavy and sticky ground or when ploughing grassland for the first time. The easy adjustability of the skimmers means that the finish is left even more precise.

More information + Less information -
Untergrundlockerer (1) 72001948_T01_d1_230731_CMS

Subsoil points

Under certain conditions, it may be necessary to loosen the surface below the working depth of the plough body. The loosening legs are height-adjustable and can be easily replaced.

More information + Less information -

Related links

Here you will find further information on cultivation

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.